Tips for Control
|
| The best way to avoid invasions of mice is to (1) provide as little harborage as possible that might attract rodents, and (2) seal as many holes and cracks in the outside of the home through which mice might enter. Follow these recommendations to help prevent rodents from seeking the shelter provided by your home: |
 |
Keep firewood stored as far from the home as possible and store it off the ground. |
|
If possible, remove any piles of debris, stones, bricks, etc. If these are near the foundation of the home they serve as harborages to attract rodents. Once there, it is any easy step for rodents to enter the building itself. |
|
Do not allow piles of leaves to accumulate next to the home's foundation. This also serves as attractive harborage for rodents - mice in particular. |
|
Seal any hole or crack larger than 1/4 of an inch. A good rule of thumb is that if a pencil can fit into it, a mouse could too. Large holes or cracks should be stuffed with steel wool or wire mesh before sealing with caulk or foam, otherwise rodents could chew through to enter. |
|
Install good, thick weatherstrip on the bottom of all doors to prevent rodents from entering. |
|
Remember, our service includes coverage of commensal rats and mice, and much of the service provided is to inspect for signs of rodents and to maintain preventive control measures. |